| |
 |
 HOME > Product Information |
 |
 |
 Touch Lens > Touch Lens |
 |
Characteristics |
| |
Flat-Surface Touch Lens consists of two ITO films, spacers and electrode. In addition, traditional mechanism was replaced by the cover lens on the ITO film to achieve flatness. Users touch the panel to conduct electricity between the fields, then the controller will calculate and obtain the result for X and Y coordinates. |
|
Advantage |
| |
Flat Surface of Touch lens presents very good texture.
 |
|
Structure |
| |
Touch lens consist of Icon, Upper ITO film, Printed layer, Bottom ITO film, and PC. Icon could be customizing and fitting in the sense of design and artistry.
Besides Icon/F/F/PC type, JTOUCH has various Touch lens structures, such as Icon/F/F/Glass, Icon/F/ITO glass, Icon/F/ITO glass(PC) etc..
|
|
Physical Specification |
| |
Optical
|
TP Structure
|
Film Surface Treatment
|
Specification
|
|
Icon/F/F/PC
|
Clear+Clear
|
Min. 77%, Typical 79%
|
|
Icon/F/F/PC
|
Clear+AG
|
Min. 75%, Typical 77%
|
|
Icon/F/F/G
|
Clear+Clear
|
Min. 77%, Typical 79%
|
|
Icon/F/F/G
|
Clear+AG
|
Min. 75%, Typical 77%
|
|
Icon/F/G
|
Clear
|
Min. 79%, Typical 81%
|
|
Icon/F/G
|
AG
|
Min. 77%, Typical 79%
|
Hardness
| Description |
Spec. |
Remark |
| Input Method |
Finger or Pen |
|
| Activation Force |
50 gf |
From VA 35mm |
| Hardness of surface |
3H |
JIS K 5400 |
| FPC Peeling Force |
Minimum 500 gf/cm |
Pull upward by 90o↑ |
| FPC Bending Resistance |
Meet electrical spec. after testing |
Bending degree: 180o |
| Bending radius: R1 mm |
| Bending times : 30 times |
Durability
|
Description
|
Spec.
|
Remark
|
|
Pen Sliding
Durability
|
>105 Times
|
Test Condition:
|
|
End shape:R0.8 mm
|
|
Material of Pen: Poly-acetal resin
|
|
Load force: 250 gf
|
|
Sliding length: 35 mm
|
|
Writing speed: 300 mm/sec.
|
|
Pen Pitting
Durability
|
>106 times
|
End shape:R0.8mm
|
|
Material of Pen: Poly-acetal resin
|
|
Load force: 250 gf
|
|
Frequency: 5 Hz
|
|
By PA stylus tapping at same points
|
|
Finger knocking Durability
|
>106 times
|
End shape:R8mm, Hardness:50-600
|
|
Load force: 250 gf
|
|
Frequency: 5 Hz
|
|
By Silicon rubber tapping at same points
|
Reliability
High temperature test:
70 ℃, 240 hrs
Low temperature test:
-20 ℃, 240 hrs
High Temp/High Humid. Test:
60 ℃ / 90%RH, 240 hrs
Thermal shock Test:
-30℃(0.5H)→ 70℃(0.5H),Total 20 cycles
Environmental Condition
Storage (-20℃ ~ 70℃ )
Temperature -20 °C ~ +60 °C, humidity 10% ~ 90%.
Temperature +60 °C ~ +70 °C, humidity 10% ~ 60%.
Non-Condensing.
Operate (-10℃ ~ 60℃ )
Temperature -10 °C ~ +40 °C, humidity 10% ~ 90%.
Temperature +40 °C ~ +60 °C, humidity 10% ~ 60%.
Non-Condensing. |
 |
|
|
|
