JTOUCH介面光電股份有限公司

首頁 > 產品資訊

Touch Lens > Touch Lens

特性

全平面Touch lens主要組成除上下兩組ITO導電層、Spacer及電極外，於上部ITO film上方貼合一層Cover lens 取代傳統機殼，達到全平面化之設計目的。使用時利用壓力使上下電極導通，經由控制器測知面板電壓變化而計算出接觸點位置進行輸入。。

優點

全平面化設計質感高。

結構

Touch lens產品由Icon,上部ITO film,印刷層,下部ITO film,加上PC等結構組成.
Icon表面可依不同客戶需求印刷或濺鍍不同顏色或圖面已增加質感與美觀性.

除一般Iocn/F/F/PC產品外,介面光電也同時擁有不同結構的Touch lens製造技術. 如Icon/F/F/Glass, Icon/F/ITO glass,Icon/F/ITO glass(PC)等.

主要規格

光學規格

入力/硬度/FPC拉力規格

Description	Spec.	Remark
Input Method	Finger or Pen
Activation Force	50 gf	From VA 35mm
Hardness of surface	3H	JIS K 5400
FPC Peeling Force	Minimum 500 gf/cm	Pull upward by 90^o^↑
FPC Bending Resistance	Meet electrical spec. after testing	Bending degree: 180^o
		Bending radius: R1 mm
		Bending times : 30 times

Durability規格

Description	Spec.	Remark
Pen Sliding Durability	>10⁵ Times	Test Condition:
		End shape:R0.8 mm
		Material of Pen: Poly-acetal resin
		Load force: 250 gf
		Sliding length: 35 mm
		Writing speed: 300 mm/sec.
Pen Pitting Durability	>10⁶ times	End shape:R0.8mm
		Material of Pen: Poly-acetal resin
		Load force: 250 gf
		Frequency: 5 Hz
		By PA stylus tapping at same points
Finger knocking Durability	>10⁶ times	End shape:R8mm, Hardness:50-60⁰
		Load force: 250 gf
		Frequency: 5 Hz
		By Silicon rubber tapping at same points

Reliability

High temperature test:

70 ℃, 240 hrs

Low temperature test:

-20 ℃, 240 hrs

High Temp/High Humid. Test:

60 ℃ / 90%RH, 240 hrs

Thermal shock Test:

-30℃(0.5H)→ 70℃(0.5H),Total 20 cycles

Environmental Condition

Storage (-20℃ ~ 70℃ )

Temperature -20 °C ~ +60 °C, humidity 10% ~ 90%.

Temperature +60 °C ~ +70 °C, humidity 10% ~ 60%.

Non-Condensing.

Operate (-10℃ ~ 60℃ )

Temperature -10 °C ~ +40 °C, humidity 10% ~ 90%.

Temperature +40 °C ~ +60 °C, humidity 10% ~ 60%.

Non-Condensing.